|
Cable Testers and Harness Testers Made Easy! |
|
| Step 1: Start the easy-wire software. In the Main Menu, click Create/Verify Cirris Adapters. | |
|
|
Step 2: In the Create/Verify Adapters window, click Verify an Adapter. | |
|
|
Step 3: Follow the instructions on the
screen.
"Probe out" the connector to be sure it is wired properly. Print out the labels, and attach them to the adapter. |
|
|
| Step 4: Return to the Create/Verify Adapters window, then highlight the adapter you have verified. Click Create Adapter Graphic. | |
|
| Step 5: In the Set Graphics Information window, set the rows and columns for the graphic. | |
|
| Step 6: Place pins in the cells you want to use by clicking on them in the correct pin order. When you are done, click Done. | |
|
| Your adapter is now ready to use. |
